Odd Problem Printing to Scale
Posted: Sat Jan 15, 2005 2:04 pm
I have recently purchased CMS IntelliCAD 5 SE, and am trying to print to scale. However, an odd problem occurs:
I'm printing in landscape format on a standard 8.5 x 11 sheet at a scale of 1" = 1'-0", I have one vport in pspace set to a scale of 1/12xp, and my drawing is drawn at 1:1 in model space. Print settings are to plot at 1:1, extents, plot centered.
After printing and I check with an Architect's scale, my Y-objects are scaled correctly, but my X-objects are NTS, maybe .5" to .75" (scaled) off. Also, any paperspace entities such as the titleblock share the same problem.
Any suggestions?
Thanks,
Austen
I'm printing in landscape format on a standard 8.5 x 11 sheet at a scale of 1" = 1'-0", I have one vport in pspace set to a scale of 1/12xp, and my drawing is drawn at 1:1 in model space. Print settings are to plot at 1:1, extents, plot centered.
After printing and I check with an Architect's scale, my Y-objects are scaled correctly, but my X-objects are NTS, maybe .5" to .75" (scaled) off. Also, any paperspace entities such as the titleblock share the same problem.
Any suggestions?
Thanks,
Austen