CAD Software Forum

This discussion board seems to be just short of dead. I see many questions go unanswered and when they do get answered, considerable time has often passed. There is a newsgroup on usenet called alt.cad.intellicad. Go there if you really need some help. It seems like there is nothing much going on there but post and people pop right out.

CW,

You know the Moderators help out for free and like all people we all get very busy from time to time.

Are you interested in helping us out?


------------------
Regards
John Finlay

I have'nt the time to participate on a regular basis in this group. I didn't mean to imply that the moderators are not doing their job. I was suggesting that people may get the answers they need in a more timely manor by broadening their scope. Usenet groups are not moderated and have a very broad base of knowledgeable people. They are not nearly as dependend on a few as they are here. One should always have a broad base of resources. This is one. Usenet is another.

[This message has been edited by CW (edited 10-23-2003).]

yes. you are right CW. some posted question did not answer properly by the moderators so by then our problem is still pending.

by the way CW where can i find the site.

CW Thank you for your info i really appreciate it than other moderator here.

Ronald

The quickest way to get there would be to go to Google, click on the groups tab and then do a search on alt.cad.intellicad. Most ISPs have a news server. Contact your ISP and ask them for the address of their news server. Depending on your browser, you should be able to set it up to go right there. If using Outlook or Outlook Express, type news into help and it will tell you how to configure it. In addition to the Intellicad newsgroup, there are thousands of other groups on about every subject you could ask for.

Thank you.

Best regards,
Ronald