perimeter

New to IntelliCAD? Get started here with basic questions and answers.

Moderators: CMS Inc, avaernes

Post Reply
libomcad
Newbie
Posts: 3
Joined: Wed Oct 09, 2019 7:13 am

perimeter

Post by libomcad » Thu Oct 10, 2019 4:09 am

Hello
Please how do I measure the perimeter (length of all lines)
Thanks
Zdenko
sln8458
Valued Contributor
Posts: 81
Joined: Mon May 19, 2003 11:01 pm
Contact:

Re: perimeter

Post by sln8458 » Fri Oct 11, 2019 9:03 am

Hi Zdenko,

There is not a 'perimeter' command, however if your object is a circle/closed polyline/closed shape then if you select the object and then use the 'list' command this will give you the perimeter.

hth
SteveN
libomcad
Newbie
Posts: 3
Joined: Wed Oct 09, 2019 7:13 am

Re: perimeter

Post by libomcad » Sun Oct 13, 2019 10:49 pm

Thank you for your answer but command "list" doesn t exist
libomcad
Newbie
Posts: 3
Joined: Wed Oct 09, 2019 7:13 am

Re: perimeter

Post by libomcad » Mon Oct 14, 2019 12:38 am

Komentár 2019-10-14 083323.jpg
Komentár 2019-10-14 083323.jpg (7.9 KiB) Viewed 20 times
for example for example, picture - total line length
sln8458
Valued Contributor
Posts: 81
Joined: Mon May 19, 2003 11:01 pm
Contact:

Re: perimeter

Post by sln8458 » Mon Oct 14, 2019 2:40 am

Hi Zdenko,

the perimeter of your object needs to be drawn with a Polyline.
Image


then using the List command (type - list entity information - into the search bar in the help section)
Image


Your should get something like this:
Image


SteveN
Post Reply