Re: DWG to PDF

#6
The Page Setup is ok, I tried to use DWG to PDF.

The result is a black drawing in PDF file.

Other formats the result is a PLT file. In "Microsoft to PDF" the page size max is A4, and result file is also PLT.

Did I miss something ?
CMS1.jpg
CMS1.jpg (18.95 KiB) Viewed 1987 times
CMS1.jpg
CMS1.jpg (18.95 KiB) Viewed 1987 times
Version 9.2.
Attachments
cms2.jpg
cms2.jpg (20.1 KiB) Viewed 1987 times

Re: DWG to PDF

#8
Hi

90% of my work is A3 so the microsoft to pdf does what I need. However if I need larger formats I use PDFCreator:
See if you can get the correct paper size with this.
Oh, I couldn't read your image, blurred.
Image
Steve

Re: DWG to PDF

#9
Image is horrible !! The web page does not allow me to upload more resolution file size. Microsoft PDf dosn't allow me to add large print size. I usually print in A1 format.

I will try PDF Creator FREE to test. But all prints are black until now, with many printer machines.

It's really important to print PDF, it's crucial !!!

Re: DWG to PDF

#10
sln8458 wrote:
Mon Jun 01, 2020 9:02 am
Hi

90% of my work is A3 so the microsoft to pdf does what I need. However if I need larger formats I use PDFCreator:
See if you can get the correct paper size with this.
Oh, I couldn't read your image, blurred.
Image
Steve
Attachments
cms5.jpg
cms5.jpg (129.34 KiB) Viewed 1957 times

Re: DWG to PDF

#11
DenisSilveira wrote:
Mon Jun 01, 2020 11:24 am
sln8458 wrote:
Mon Jun 01, 2020 9:02 am
Hi

90% of my work is A3 so the microsoft to pdf does what I need. However if I need larger formats I use PDFCreator:
See if you can get the correct paper size with this.
Oh, I couldn't read your image, blurred.
Image
Steve
I had downloaded PDFCreator and looks fine. It worked. Only all other print machines does not.

Re: DWG to PDF

#13
sln8458 wrote:
Tue Jun 02, 2020 1:13 am
Hi Denis,

Can you confirm that you can print at the size you need AND that the background is NOT black

Steve
Hi Steve.

YES, PDFCreator solves the problem and I can print out SI sizes AND is not background black. My problem is solved.

Other print machines doesn't work, ok.

Re: DWG to PDF

#14
DenisSilveira wrote:
Tue Jun 02, 2020 3:32 pm

Hi Steve.

YES, PDFCreator solves the problem and I can print out SI sizes AND is not background black. My problem is solved.

Other print machines doesn't work, ok.
Hi Denis,
That suggests to me that the problem (black background) is with the other printer setups,
Could you try to uninstall one of the printers on the PC and re-install?

The only other thought I had is in the 'monochrome.ctb' file.
You have a white background on your monitor and this may be causing the black background

Steve

Re: DWG to PDF

#15
sln8458 wrote:
Wed Jun 03, 2020 12:33 am
DenisSilveira wrote:
Tue Jun 02, 2020 3:32 pm

Hi Steve.

YES, PDFCreator solves the problem and I can print out SI sizes AND is not background black. My problem is solved.

Other print machines doesn't work, ok.
Hi Denis,
That suggests to me that the problem (black background) is with the other printer setups,
Could you try to uninstall one of the printers on the PC and re-install?

The only other thought I had is in the 'monochrome.ctb' file.
You have a white background on your monitor and this may be causing the black background

Steve
Hi Steve.

I'll try reinstall one of them. But "Dwg to Pdf" can't be reinstalled.

I use .stb file and I tried to change color of background and also table colors turn white and black to see if results change. I doesn't.

File to print
cms7.jpg
cms7.jpg (102.73 KiB) Viewed 1885 times
Result
cms6.jpg
cms6.jpg (58.16 KiB) Viewed 1885 times
Config screen:
cms7.jpg
cms7.jpg (102.73 KiB) Viewed 1885 times
Attachments
cms8.jpg
cms8.jpg (101.87 KiB) Viewed 1884 times