problem - Wacom Intuos tablet not install in Intellicad
first step COMMAND - TABLET CFG
next step Y
next step LEFT POINT my tablet break off
#2
The following is copied from the Intellicad User's Group e-zine:
Using a Digitizer in IntelliCAD:
If you want to use a Digitizer Tablet in IntelliCAD, it must be compatible with
a program called "TabletWorks."
Tabletworks is a program that configures the puck as a pointing device in Windows.
From there you can go into IntelliCAD and configure the tablet.
Calcomp and Summagraphics tablets are compatible with Tabletworks and
work very well with IntelliCAD.
The TabletWorks program can be downloaded from here
-------------------------------------------
Click here for the latest Wacom drivers and technical support.
[This message has been edited by Lee (edited 02-07-2002).]
Using a Digitizer in IntelliCAD:
If you want to use a Digitizer Tablet in IntelliCAD, it must be compatible with
a program called "TabletWorks."
Tabletworks is a program that configures the puck as a pointing device in Windows.
From there you can go into IntelliCAD and configure the tablet.
Calcomp and Summagraphics tablets are compatible with Tabletworks and
work very well with IntelliCAD.
The TabletWorks program can be downloaded from here
-------------------------------------------
Click here for the latest Wacom drivers and technical support.
[This message has been edited by Lee (edited 02-07-2002).]