Hi,
It works on my V11.0 PE+.
Please create a new simple polyline with an arc segment and try again.

QuanNguyen wrote: ↑

Mon Nov 21, 2022 6:28 pm

Hi,
It works on my V11.0 PE+.
Please create a new simple polyline with an arc segment and try again.

I tried it many more times and it won't extrude if it has even 1 arc in the closed polyline.
Thanks.

Can you attach a sample drawing having the polyline that can't be extruded?

QuanNguyen wrote: ↑

Tue Nov 22, 2022 1:47 am

Can you attach a sample drawing having the polyline that can't be extruded?

It won't let me attach the file, it keeps saying
"Error: invalid file extension test.dwg."
That comes up whether I drag and drop into the message or use the Attach Files button.
Ramon

You can attach the zip file.

QuanNguyen wrote: ↑

Tue Nov 22, 2022 6:46 pm

You can attach the zip file.
Extrusion.zip

Thanks Quan.
I was able to extrude the pline your file, attached is one I cannot extrude.
Ramon

Hi Ramon,

How did you create the shape in your file?

I was unable to extrude the original shape, but after I exploded and then Pedit to a closed polyline I was then able to extrude it!?
I had/have a similar problem with closed polyline shapes created by a lisp I downloaded 'Wisey's steel shapes'. It creates closed polyline shapes that 'sometimes' need to be exploded and then re-joined to be able to extrude the shape.
Not a total solution I know, but might help.

SteveN

sln8458 wrote: ↑

Wed Nov 23, 2022 1:25 am

Hi Ramon,

How did you create the shape in your file?

I was unable to extrude the original shape, but after I exploded and then Pedit to a closed polyline I was then able to extrude it!?
I had/have a similar problem with closed polyline shapes created by a lisp I downloaded 'Wisey's steel shapes'. It creates closed polyline shapes that 'sometimes' need to be exploded and then re-joined to be able to extrude the shape.
Not a total solution I know, but might help.

SteveN

I usually draw lines and arcs, always snapping to the ends then use JOIN and Close. It does it with any method as long as there's at least 1 arc in it. About 80-90% of them won't extrude. I can't find any difference in the ones that will and the ones that won't. In version 10 I never had that error 1 time out of 1000s of polylines I made. Even PLINES that I made in 10 won't extrude in v11. I'm stumped, I have to copy up and LOFT most of them. I never use any 3rd party software to make them.
-=(RH)=-

Hi Ramon,

Here is a video of me creating a similar shape to your test dwg, with an arc using a NEW file created from the original Icad template.

https://www.dropbox.com/s/64f5rmp2kzst4 ... 8.avi?dl=0

SteveN

sln8458 wrote: ↑

Thu Nov 24, 2022 1:12 am

Hi Ramon,

Here is a video of me creating a similar shape to your test dwg, with an arc using a NEW file created from the original Icad template.

https://www.dropbox.com/s/64f5rmp2kzst4 ... 8.avi?dl=0

SteveN

It says that the video has been deleted. I believe that it works for you and others, I just don't know why it won't work for me most of the time, it has to be related to all the other glitches I'm having.
Ramon

Sorry Ramon, yes I deleted it yesterday by mistake.
I will put it back and post a new link.

new link:
https://www.dropbox.com/s/64f5rmp2kzst4 ... 8.avi?dl=0

SteveN

sln8458 wrote: ↑

Fri Nov 25, 2022 1:09 am

Sorry Ramon, yes I deleted it yesterday by mistake.
I will put it back and post a new link.

new link:
https://www.dropbox.com/s/64f5rmp2kzst4 ... 8.avi?dl=0

SteveN

1. Are you using Windows 11? There must be something wrong with my install.
2. What did you use to record the video?
Thanks,
-=(RH)=-

rhgrafix wrote:
1. Are you using Windows 11? There must be something wrong with my install.
2. What did you use to record the video?
Thanks,
-=(RH)=-

1. Yes I'm now on windows 11, but only a few days.
2. ThunderSoft Screen Recorder (free)

SteveN