#2
You need an external IGES to DXF/DWG convertor.
You can download a 30day fully working demo of one from http://www.vectorcam.com/igsdown.html
Hope this helps,
------------------
Michael John Smyth
Irish / UK Representative
Efnet Autodesk Users Group
www.eaug.org
You can download a 30day fully working demo of one from http://www.vectorcam.com/igsdown.html
Hope this helps,
------------------
Michael John Smyth
Irish / UK Representative
Efnet Autodesk Users Group
www.eaug.org